L1 LAMPIRAN Wawancara Wawancara dengan Bapak Ali Naga Saputra selaku IT Head Division di PT. Adicipta Innovations Technology : 1. Apakah perusahaan saat ini membutuhkan sistem jaringan baru? Jawab: Ya, kami membutuhkan sistem jaringan VLAN yang baru untuk gedung baru kami. 2. Apakah ada masalah dengan jaringan kantor yang ada sekarang? Jawab: Performa jaringan kantor kami kurang baik, dikarenakan seringnya terjadi troubleshooting. 3. Seberapa penting sebenarnya jaringan VLAN untuk kantor Anda? Jawab: Sangat penting, karena dapat menunjang kinerja bisnis kami. 4. Kira-kira bentuk jaringan seperti apa yang Anda inginkan? Jawab: Jaringan yang memiliki performa yang baik dan dapat mengatasi kendala troubleshooting yang kami hadapi. 5. Apabila ada penambahan komputer ataupun penambahan hardware jaringan, langkah langkah apa saja yang tim IT lakukan? Jawab: Untuk penambahan user, untuk awal kami melihat port pada divisi dimana komputer akan ditempatkan. Apabila tidak ada port kosong, maka kami akan menambahkan switch pada divisi tersebut. Setelah itu kami melakukan konfigurasi pada router apabila terjadi penambahan switch.
L2 Lampiran Lampiran 3 Berisi konfigurasi pada router dan switch - Konfigurasi Pada Router Router>en Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#int fa0/0 Router(config-if)#ip address 192.168.2.5255.255.255.0 Router(config-if)#no shutdown %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up Router(config-if)#exit Router(config)#banner motd # Enter TEXT message. End with the character '#'. ***************************** Adicipta Innovations Technology ***************************** # Router(config)#hostname R1 R1(config)#enable secret adiciptainnovations R1(config)#exit
R1# %SYS-5-CONFIG_I: Configured from console by console R1#en R1#conf t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#line console 0 R1(config-line)#password adiciptainnovations R1(config-line)#login R1(config-line)#exit R1(config)#interface fa0/0.10 %LINK-5-CHANGED: Interface FastEthernet0/0.10, changed state to up R1(config-subif)#en R1(config-subif)#encapsulation dot R1(config-subif)#encapsulation dot1q 10 R1(config-subif)#ip address 192.168.10.1 255.255.255.0 R1(config-subif)#no shutdown R1(config-subif)#exit R1(config)#interface fa0/0.20 %LINK-5-CHANGED: Interface FastEthernet0/0.20, changed state to up R1(config-subif)#encapsulation dot1q 20 R1(config-subif)#ip address 192.168.20.1 255.255.255.0 R1(config-subif)#no shutdown
R1(config-subif)#exit R1(config)#interface fa0/0.30 R1(config-subif)# %LINK-5-CHANGED: Interface FastEthernet0/0.30, changed state to up R1(config)#ip dhcp ex R1(config)#ip dhcp excluded-address 192.168.2.1192.168.2.10 R1(config)#ip dhcp excluded-address 192.168.2.254 R1(config)#ip dhcp pool LAN-1 R1(dhcp-config)#network 192.168.2.0255.255.255.0 R1(dhcp-config)#def R1(dhcp-config)#default-router 192.168.2.5 R1(dhcp-config)#exit R1(config)#ip dhcp pool vlan10 R1(dhcp-config)#network 192.168.10.0255.255.255.0 R1(dhcp-config)#def R1(dhcp-config)#default-router 192.168.10.1 R1(dhcp-config)#exit R1(config)#ip dhcp pool vlan20 R1(dhcp-config)#network 192.168.20.0255.255.255.0 R1(dhcp-config)#default-router 192.168.20.1 R1(dhcp-config)#exit R1(config)#ip dhcp pool vlan30 R1(dhcp-config)#network 192.168.30.0255.255.255.0 R1(dhcp-config)#default-router 192.168.30.1
R1(dhcp-config)#exit R1(config)# Konfigurasi Pada Switch Switch>en Switch#conf t Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#hos Switch(config)#hostname S1 S1(config)#enable secret adiciptainnovations S1(config)#exit S1# %SYS-5-CONFIG_I: Configured from console by console S1#conf t Enter configuration commands, one per line. End with CNTL/Z. S1(config)#banner motd # Enter TEXT message. End with the character '#'. *************************** Adicipta Innovations Technology ***************************
# S1(config)#line console 0 S1(config-line)#password adiciptainnovations S1(config-line)#login S1(config-line)#exit S1(config)#vlan 10 S1(config-vlan)#name Inventory S1(config-vlan)#exit S1(config)#vlan 20 S1(config-vlan)#name VPN S1(config-vlan)#exit S1(config)#vlan 30 S1(config-vlan)#name ITDivision S1(config-vlan)#exit S1(config)#inte S1(config)#interface fa S1(config)#interface fastethernet 0/1 S1(config-if)#sw S1(config-if)#switchport mode trunk S1(config-if)#exit S1(config)#interface range fastethernet 0/2-3 S1(config-if-range)#switchport mode access S1(config)#interface range fastethernet 0/4-5
S1(config-if-range)#switchport mode access S1(config-if-range)#switchport access vlan 10 S1(config)#interface range fastethernet 0/6-7 S1(config-if-range)#switchport mode access S1(config-if-range)#switchport access vlan 20 S1(config)#interface range fastethernet 0/8-11 S1(config-if-range)#switchport mode access S1(config-if-range)#switchport access vlan 30 S1(config)#interface fastethernet 0/10 S1(config-if)#switchport mode access S1(config-if)#exit S1(config)#interface range fastethernet 0/12-17 S1(config-if-range)#switchport mode access S1(config)# S1(config)#int vlan 1 S1(config-if)#ip address 192.168.2.19 255.255.255.0 S1(config-if)#no shut S1(config-if)# %LINK-5-CHANGED: Interface Vlan1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up S1(config-if)#exit S1(config)#